Feelworld KBC20N PTZ Camera Controller
€799,99
Info
Feelworld KBC20N PTZ Camera Controller
De Feelworld KBC20N PTZ Camera Controller is een professionele keyboardcontroller voor het aansturen van meerdere PTZ-camera's in grote producties zoals videoconferenties, kerkdiensten, livestreams, broadcastshows en online onderwijs.
Highlights
- 4D-joystick voor pan, tilt, zoom en focus
- Bestuurt tot 255 PTZ-camera's via netwerk of analoog
- Ondersteunt NDI, ONVIF, IP VISCA, VISCA, Pelco-D en Pelco-P
- PoE-voeding via een enkele netwerkkabel tot 100 m
- 255 presetposities en 4 snelkeuzeknoppen (CAM1-CAM4)
- LCD-scherm met realtime statusweergave
Meerdere besturingsprotocollen
De KBC20N ondersteunt Pelco-D/P en VISCA via RS485, RS422 en RS232, en NDI, IP VISCA, Sony VISCA en ONVIF via IP/netwerk, waardoor de controller met uiteenlopende camera's samenwerkt.
Flexibel bedieningspaneel
Op het paneel zijn overzichtelijke knoppen en draaiknoppen geplaatst voor variabele PTZ-snelheid, rode en blauwe gain, focus, iris, on-screen display, witbalans en snelle cameraomschakeling. Vier instelbare functietoetsen (F1-F4) roepen direct de gewenste functie op.
Aansluitingen
De controller werkt in netwerk- en analoge modus en biedt RS422/RS485, RS232 en RJ45 (ethernet), plus een TALLY-contact en een Kensington-slot.
PoE-voeding
Via een enkele ethernetkabel wordt de controller gevoed over een afstand tot 100 m. Een CAT6-kabel of hoger is vereist, evenals een router of switch die PoE volgens IEEE802.3af/at ondersteunt (48V of hoger).
Webconfiguratie
Door de controller via het netwerk met een computer te verbinden, kunnen PTZ-camera's automatisch worden gezocht of handmatig worden toegevoegd (ONVIF). Daarnaast zijn netwerkinstellingen en gebruikers te beheren en is de firmware via de webinterface te updaten.
Kenmerken
- Model: KBC20N
- LAN: 1 x RJ45
- RS232/RS485/RS422: 1 x RJ45-netwerkpoort naar 9-pins ronde male-connector
- RS422: 1 x 5-pins terminal
- TALLY/contact: 1 x 8-pins terminal
- Besturingsprotocollen: NDI, ONVIF, IP VISCA, VISCA, Pelco-D, Pelco-P
- Baudrate: 1200-115200 bps
- Display: LCD-scherm
- Toetstoon: aan/uit
- Joystick: 4D (omhoog, omlaag, links, rechts, zoom, rotatie)
- Firmware-update: via webinterface
- Ingangsspanning: DC 12V
- Stroomverbruik: maximaal 0,6 W
- Bedrijfstemperatuur: 0 C - 50 C
- Luchtvochtigheid: 0% - 90%
- Gewicht: 1,3 kg
- Afmetingen: 270 x 135 x 110 mm
- Garantie: 2 jaar
Meegeleverde accessoires
- 1 x Controller
- 1 x Voedingsadapter
- 1 x RS45-DIN8-kabel
- 1 x Snelstartgids
Info
Feelworld KBC20N PTZ Camera Controller
Der Feelworld KBC20N PTZ Camera Controller ist eine professionelle Keyboard-Steuerung für die Bedienung mehrerer PTZ-Kameras in großen Produktionen wie Videokonferenzen, Gottesdiensten, Livestreams, Broadcast-Shows und Online-Unterricht.
Highlights
- 4D-Joystick für Schwenken, Neigen, Zoom und Fokus
- Steuert bis zu 255 PTZ-Kameras über Netzwerk oder analog
- Unterstützt NDI, ONVIF, IP VISCA, VISCA, Pelco-D und Pelco-P
- PoE-Stromversorgung über ein einziges Netzwerkkabel bis zu 100 m
- 255 Preset-Positionen und 4 Schnellwahltasten (CAM1-CAM4)
- LCD-Display mit Echtzeit-Statusanzeige
Mehrere Steuerungsprotokolle
Der KBC20N unterstützt Pelco-D/P und VISCA über RS485, RS422 und RS232 sowie NDI, IP VISCA, Sony VISCA und ONVIF über IP/Netzwerk und arbeitet so mit unterschiedlichsten Kameras zusammen.
Flexibles Bedienfeld
Auf dem Bedienfeld sind übersichtliche Tasten und Drehregler für variable PTZ-Geschwindigkeit, Rot- und Blau-Gain, Fokus, Blende, On-Screen-Display, Weißabgleich und schnelles Kameraumschalten angeordnet. Vier einstellbare Funktionstasten (F1-F4) rufen die gewünschte Funktion direkt auf.
Anschlüsse
Die Steuerung arbeitet im Netzwerk- und Analogmodus und bietet RS422/RS485, RS232 und RJ45 (Ethernet) sowie einen TALLY-Kontakt und einen Kensington-Schlossanschluss.
PoE-Stromversorgung
Über ein einziges Ethernet-Kabel wird die Steuerung über eine Distanz von bis zu 100 m mit Strom versorgt. Erforderlich sind ein CAT6-Kabel oder höher sowie ein Router oder Switch, der PoE nach IEEE802.3af/at unterstützt (48 V oder höher).
Web-Konfiguration
Wird die Steuerung über das Netzwerk mit einem Computer verbunden, lassen sich PTZ-Kameras automatisch suchen oder manuell hinzufügen (ONVIF), Netzwerkeinstellungen und Benutzer verwalten und die Firmware über die Weboberfläche aktualisieren.
Merkmale
- Modell: KBC20N
- LAN: 1 x RJ45
- RS232/RS485/RS422: 1 x RJ45-Netzwerkanschluss auf 9-poligen runden Stecker (male)
- RS422: 1 x 5-Pin-Terminal
- TALLY/Kontakt: 1 x 8-Pin-Terminal
- Steuerungsprotokolle: NDI, ONVIF, IP VISCA, VISCA, Pelco-D, Pelco-P
- Baudrate: 1200-115200 bps
- Display: LCD-Bildschirm
- Tastenton: ein/aus
- Joystick: 4D (auf, ab, links, rechts, Zoom, Drehung)
- Firmware-Update: über Weboberfläche
- Eingangsspannung: DC 12V
- Stromverbrauch: maximal 0,6 W
- Betriebstemperatur: 0 °C - 50 °C
- Luftfeuchtigkeit: 0% - 90%
- Gewicht: 1,3 kg
- Abmessungen: 270 x 135 x 110 mm
- Garantie: 2 Jahre
Mitgeliefertes Zubehör
- 1 x Controller
- 1 x Netzadapter
- 1 x RS45-DIN8-Kabel
- 1 x Schnellstartanleitung
Info
Feelworld KBC20N PTZ Camera Controller
The Feelworld KBC20N PTZ Camera Controller is a professional keyboard controller for operating multiple PTZ cameras in large productions such as video conferencing, church services, live streaming, broadcast shows and online education.
Highlights
- 4D joystick for pan, tilt, zoom and focus
- Controls up to 255 PTZ cameras over network or analog
- Supports NDI, ONVIF, IP VISCA, VISCA, Pelco-D and Pelco-P
- PoE power over a single network cable up to 100 m
- 255 preset positions and 4 quick-select buttons (CAM1-CAM4)
- LCD screen with real-time status display
Multiple control protocols
The KBC20N supports Pelco-D/P and VISCA over RS485, RS422 and RS232, plus NDI, IP VISCA, Sony VISCA and ONVIF over IP/network, allowing it to work with a wide range of cameras.
Flexible control panel
The panel features clearly arranged buttons and knobs for variable PTZ speed, red and blue gain, focus, iris, on-screen display, white balance and fast camera switching. Four customisable function buttons (F1-F4) call up the required function directly.
Connections
The controller operates in network and analog mode and offers RS422/RS485, RS232 and RJ45 (Ethernet), along with a TALLY contact and a Kensington lock slot.
PoE power supply
A single Ethernet cable powers the controller over a distance of up to 100 m. A CAT6 cable or higher is required, as well as a router or switch that supports PoE to IEEE802.3af/at (48 V or higher).
Web configuration
By connecting the controller to a computer over the network, PTZ cameras can be searched automatically or added manually (ONVIF), network settings and users can be managed, and the firmware can be updated via the web interface.
Characteristics
- Model: KBC20N
- LAN: 1 x RJ45
- RS232/RS485/RS422: 1 x RJ45 network port to 9-pin round male connector
- RS422: 1 x 5-pin terminal
- TALLY/contact: 1 x 8-pin terminal
- Control protocols: NDI, ONVIF, IP VISCA, VISCA, Pelco-D, Pelco-P
- Baud rate: 1200-115200 bps
- Display: LCD screen
- Key tone: on/off
- Joystick: 4D (up, down, left, right, zoom, rotation)
- Firmware update: via web interface
- Input voltage: DC 12V
- Power consumption: maximum 0.6 W
- Operating temperature: 0 °C - 50 °C
- Humidity: 0% - 90%
- Weight: 1.3 kg
- Dimensions: 270 x 135 x 110 mm
- Warranty: 2 years
Supplied accessories
- 1 x Controller
- 1 x Power adapter
- 1 x RS45-DIN8 cable
- 1 x Quick start guide