Godox LT1 Smart Creative LED Pixel Light
€39,95
Video
Info
Godox LT1 Smart Creative LED Pixel Light
De Godox LT1 Smart Creative LED Pixel Light is een compacte pixellamp met RGB-ledmatrix die als kapje op de flitsschoen van de camera zit en tegelijk werkt als aan/uit-schakelaar voor een groep Godox-lampen.
Highlights
- RGB-pixeldisplay met afbeeldingen, GIF's en lopende tekst
- Eigen pixelart maken via de Godox Light-app
- Een druk op de knop schakelt een hele groep Godox-lampen aan of uit
- Bluetooth met NFC voor direct koppelen
- Te monteren op de flitsschoen, op een magnetisch oppervlak of met een band
- Gebruiksduur van circa 3 uur en 10 minuten
Pixeldisplay met eigen ontwerpen
Op de voorzijde zit een RGB-pixeldisplay met een ingebouwde bibliotheek met afbeeldingen, GIF's en lopende tekst. Via de Godox Light-app is daarnaast eigen pixelart te maken, inclusief eigen GIF's en teksten. GIF's en lopende tekst ondersteunen tot 10 frames.
Een druk op de knop voor een hele lichtgroep
In de Godox Light-app worden Godox-lampen samen met de LT1 in een scène gegroepeerd. In de controlemodus schakelt de controlknop op de LT1 daarna de hele groep in een keer aan of uit, zonder de telefoon te ontgrendelen. De verbinding blijft ook staan na het afsluiten van de app of het herstarten van de lampen, en verbreekt alleen wanneer de Bluetooth-verbinding wordt gereset. De LT1 schakelt uitsluitend aan en uit; instellingen als sterkte en kleur blijven via de app lopen. De lampen die worden bestuurd hebben Bluetooth-firmware versie 66 of nieuwer nodig.
Koppelen via Bluetooth of NFC
De LT1 verbindt via Bluetooth met de Godox Light-app, met een bereik tot 15 meter. Door het ingebouwde NFC-vlak is koppelen ook met een tik van de telefoon te doen. Firmware-updates verlopen eveneens via de app.
Meerdere LT1's in dezelfde scène
Aan dezelfde scène zijn tot drie LT1-eenheden toe te voegen, zodat meerdere mensen op de set dezelfde lampen kunnen schakelen. In dezelfde ruimte zijn losse LT1's ook aan verschillende scènes te koppelen, die elkaar niet in de weg zitten.
Montage en voeding
Onderop zit een koudeschoenvoet die in de flitsschoen van de camera schuift; die voet is puur mechanisch en heeft geen elektronische contacten. Daarnaast zit er een magneetvlak in waarmee de LT1 op een ijzerhoudend oppervlak blijft zitten, en met de los verkrijgbare Godox RS-LT1 Rubber Strap for LT1 gaat hij om de arm of aan een tas. De ingebouwde accu gaat circa 3 uur en 10 minuten mee en laadt via USB-C, waarbij de LT1 tijdens het laden gewoon te gebruiken is. Onder 10% laadstatus springt het display naar het accubeeld en knippert het drie keer.
Kenmerken
- Type: pixellamp met RGB-ledmatrix en koudeschoenvoet
- Model: LT1
- Weergave: RGB-pixeldisplay met ingebouwde bibliotheek (afbeeldingen, GIF's, lopende tekst)
- Eigen content: pixelart, GIF's en lopende tekst via de Godox Light-app, tot 10 frames
- Bediening: app en knoppen op het apparaat (functieknop en controlknop)
- Lichtbediening: aan/uit van een gegroepeerde scène met Godox-lampen (geen instellingen)
- Vereiste firmware bestuurde lampen: Bluetooth-firmware versie 66 of nieuwer
- Aantal LT1's per scène: maximaal 3
- Verbinding: Bluetooth, bereik tot 15 meter, met NFC-vlak voor snel koppelen
- Montage: koudeschoenvoet (zonder elektronische contacten), magneetvlak of band
- Accu: lithium-ion, 3,7V, 400mAh, 1,48Wh (ingebouwd)
- Gebruiksduur: circa 3 uur 10 minuten
- USB-C-ingang: 5V, 1A, gebruik tijdens opladen mogelijk
- Werkomgeving: -10 °C tot 40 °C
- Afmetingen: 37 x 27 x 48 mm (zonder accessoires)
- Nettogewicht: circa 37 g (zonder accessoires)
- Niet water- en stofdicht
- Optionele accessoires: Godox RS-LT1 Rubber Strap for LT1
- Garantie: 2 jaar (batterij 1 jaar)
Meegeleverde accessoires
- 1 x Lichtunit
- 1 x USB-C-oplaadkabel
- 1 x Gebruikershandleiding
Video
Info
Godox LT1 Smart Creative LED Pixel Light
Das Godox LT1 Smart Creative LED Pixel Light ist eine kompakte Pixelleuchte mit RGB-LED-Matrix, die als Abdeckung auf dem Blitzschuh der Kamera sitzt und gleichzeitig als Ein-/Aus-Schalter für eine Gruppe Godox-Leuchten dient.
Highlights
- RGB-Pixeldisplay mit Bildern, GIFs und Lauftext
- Eigene Pixel-Art über die Godox Light App
- Ein Tastendruck schaltet eine ganze Gruppe Godox-Leuchten ein oder aus
- Bluetooth mit NFC für direktes Koppeln
- Montage auf dem Blitzschuh, auf magnetischen Flächen oder mit einem Band
- Betriebsdauer von etwa 3 Stunden 10 Minuten
Pixeldisplay mit eigenen Motiven
An der Vorderseite sitzt ein RGB-Pixeldisplay mit einer integrierten Bibliothek aus Bildern, GIFs und Lauftext. Über die Godox Light App lässt sich zusätzlich eigene Pixel-Art erstellen, einschließlich eigener GIFs und Texte. GIFs und Lauftext unterstützen bis zu 10 Frames.
Ein Tastendruck für eine ganze Lichtgruppe
In der Godox Light App werden Godox-Leuchten gemeinsam mit dem LT1 in einer Szene gruppiert. Im Steuermodus schaltet die Steuertaste am LT1 die gesamte Gruppe auf einmal ein oder aus, ohne das Telefon zu entsperren. Die Verbindung bleibt auch nach dem Schließen der App oder einem Neustart der Leuchten bestehen und wird nur beim Zurücksetzen der Bluetooth-Verbindung getrennt. Das LT1 schaltet ausschließlich ein und aus; Einstellungen wie Leistung und Farbe laufen weiterhin über die App. Die gesteuerten Leuchten benötigen Bluetooth-Firmware Version 66 oder neuer.
Koppeln per Bluetooth oder NFC
Das LT1 verbindet sich per Bluetooth mit der Godox Light App, mit einer Reichweite bis 15 Meter. Durch die integrierte NFC-Fläche gelingt das Koppeln auch mit einem Antippen des Telefons. Firmware-Updates laufen ebenfalls über die App.
Mehrere LT1 in derselben Szene
Derselben Szene lassen sich bis zu drei LT1-Einheiten hinzufügen, sodass mehrere Personen am Set dieselben Leuchten schalten können. Im gleichen Raum lassen sich einzelne LT1 auch verschiedenen Szenen zuordnen, die sich nicht gegenseitig stören.
Montage und Stromversorgung
An der Unterseite sitzt ein Blitzschuhfuß, der in den Blitzschuh der Kamera geschoben wird; dieser Fuß ist rein mechanisch und hat keine elektronischen Kontakte. Zusätzlich ist eine Magnetfläche integriert, mit der das LT1 an eisenhaltigen Oberflächen haftet, und mit dem separat erhältlichen Godox RS-LT1 Rubber Strap for LT1 sitzt es am Arm oder an einer Tasche. Der integrierte Akku hält etwa 3 Stunden 10 Minuten und lädt über USB-C, wobei sich das LT1 während des Ladens weiter nutzen lässt. Unter 10% Ladestand wechselt das Display zur Akkuanzeige und blinkt drei Mal.
Merkmale
- Typ: Pixelleuchte mit RGB-LED-Matrix und Blitzschuhfuß
- Modell: LT1
- Anzeige: RGB-Pixeldisplay mit integrierter Bibliothek (Bilder, GIFs, Lauftext)
- Eigene Inhalte: Pixel-Art, GIFs und Lauftext über die Godox Light App, bis zu 10 Frames
- Steuerung: App und Tasten am Gerät (Funktionstaste und Steuertaste)
- Lichtsteuerung: Ein/Aus einer gruppierten Szene mit Godox-Leuchten (keine Einstellungen)
- Erforderliche Firmware der gesteuerten Leuchten: Bluetooth-Firmware Version 66 oder neuer
- Anzahl LT1 pro Szene: maximal 3
- Verbindung: Bluetooth, Reichweite bis 15 Meter, mit NFC-Fläche zum schnellen Koppeln
- Montage: Blitzschuhfuß (ohne elektronische Kontakte), Magnetfläche oder Band
- Akku: Lithium-Ionen, 3,7V, 400mAh, 1,48Wh (integriert)
- Betriebsdauer: etwa 3 Stunden 10 Minuten
- USB-C-Eingang: 5V, 1A, Nutzung während des Ladens möglich
- Betriebsumgebung: -10 °C bis 40 °C
- Abmessungen: 37 x 27 x 48 mm (ohne Zubehör)
- Nettogewicht: etwa 37 g (ohne Zubehör)
- Nicht wasser- und staubdicht
- Optionales Zubehör: Godox RS-LT1 Rubber Strap for LT1
- Garantie: 2 Jahre (Akku 1 Jahr)
Mitgeliefertes Zubehör
- 1 x Leuchteneinheit
- 1 x USB-C-Ladekabel
- 1 x Bedienungsanleitung
Video
Info
Godox LT1 Smart Creative LED Pixel Light
The Godox LT1 Smart Creative LED Pixel Light is a compact pixel light with an RGB LED matrix that sits on the camera hot shoe as a cover and doubles as an on/off switch for a group of Godox lights.
Highlights
- RGB pixel display with images, GIFs and scrolling text
- Custom pixel art through the Godox Light app
- One button press switches a whole group of Godox lights on or off
- Bluetooth with NFC for instant pairing
- Mounts on the hot shoe, on a magnetic surface or with a strap
- Runtime of approximately 3 hours 10 minutes
Pixel display with custom designs
The front carries an RGB pixel display with a built-in library of images, GIFs and scrolling text. The Godox Light app also allows custom pixel art, including custom GIFs and text. GIFs and scrolling text support up to 10 frames.
One press for a whole light group
In the Godox Light app, Godox lights are grouped into a scene together with the LT1. In light control mode, the control button on the LT1 then switches the entire group on or off at once, without unlocking the phone. The connection stays in place after closing the app or restarting the lights, and only drops when the Bluetooth connection is reset. The LT1 switches on and off only; settings such as power and colour remain in the app. The lights being controlled need Bluetooth firmware version 66 or later.
Pairing over Bluetooth or NFC
The LT1 connects to the Godox Light app over Bluetooth with a range of up to 15 metres. The built-in NFC area also allows pairing with a tap of the phone. Firmware updates run through the app as well.
Several LT1 units in the same scene
Up to three LT1 units can be added to the same scene, so several people on set can switch the same lights. In the same space, separate LT1 units can also be assigned to different scenes, which do not interfere with each other.
Mounting and power
The underside carries a cold shoe foot that slides into the camera hot shoe; this foot is purely mechanical and has no electronic contacts. A magnetic area is also built in, holding the LT1 on ferrous surfaces, and with the separately available Godox RS-LT1 Rubber Strap for LT1 it goes on the arm or on a bag. The built-in battery lasts approximately 3 hours 10 minutes and charges over USB-C, with the LT1 remaining usable while charging. Below 10% charge the display switches to the battery screen and flashes three times.
Characteristics
- Type: pixel light with RGB LED matrix and cold shoe foot
- Model: LT1
- Display: RGB pixel display with built-in library (images, GIFs, scrolling text)
- Custom content: pixel art, GIFs and scrolling text through the Godox Light app, up to 10 frames
- Control: app and buttons on the unit (function button and light control button)
- Light control: on/off of a grouped scene of Godox lights (no settings)
- Required firmware of controlled lights: Bluetooth firmware version 66 or later
- Number of LT1 units per scene: maximum 3
- Connection: Bluetooth, range up to 15 metres, with NFC area for fast pairing
- Mounting: cold shoe foot (without electronic contacts), magnetic area or strap
- Battery: lithium-ion, 3.7V, 400mAh, 1.48Wh (built-in)
- Runtime: approximately 3 hours 10 minutes
- USB-C input: 5V, 1A, usable while charging
- Working environment: -10 °C to 40 °C
- Dimensions: 37 x 27 x 48 mm (excluding accessories)
- Net weight: approximately 37 g (excluding accessories)
- Not water- or dust-resistant
- Optional accessories: Godox RS-LT1 Rubber Strap for LT1
- Warranty: 2 years (battery 1 year)
Supplied accessories
- 1 x Light Body
- 1 x USB-C Charging Cable
- 1 x Instruction Manual