Viltrox PL-20 Sunhood
€11,95
Info
Viltrox PL-20 Sunhood
De Viltrox PL-20 Sunhood is de zonnekap voor de Viltrox AF 24mm F1.8 en de Viltrox AF 50mm F1.8. De kap schermt licht af dat schuin op de frontlens valt en anders als sluier of lensvlek in je opname terechtkomt. Daarnaast steekt hij een stuk voor het glas uit, zodat een botsing tegen een deurpost of tafelrand op de kunststof rand terechtkomt en niet op de lens.
Highlights
- Past op de Viltrox AF 24mm F1.8 en de Viltrox AF 50mm F1.8
- Bloemvormige kap met bajonetsluiting op de voorzijde van het objectief
- De vatting van je objectief maakt niet uit, de kap zit op de voorzijde
- Geribbeld greepvlak aan de buitenzijde, ook met handschoenen aan goed vast te pakken
- Houdt zijlicht buiten beeld en houdt het contrast op peil bij tegenlicht
- Beschermt de frontlens tegen stoten en krassen
Gebruik
Licht dat schuin op de frontlens valt, veroorzaakt lensvlekken en haalt contrast uit je opname. De PL-20 vangt dat licht op voordat het het glas raakt, wat vooral scheelt bij tegenlicht en in de volle zon. Je kunt de kap gewoon laten zitten: hij blijft buiten het beeldveld van een 24mm objectief en zit het scherpstellen niet in de weg.
Uitvoering
De kap is bloemvormig: de uitsparingen in de rand volgen de rechthoekige beeldverhouding van de sensor, zodat de kap dieper kan zijn zonder in beeld te komen. Het huis is van zwart kunststof en de binnenzijde is mat afgewerkt, wat weerkaatsing van licht binnenin de kap tegengaat. Aan de buitenkant zit een geribbeld greepvlak waarmee je de bajonetsluiting losdraait.
Compatibiliteit
De PL-20 hoort bij twee objectieven uit de F1.8 full-frame serie van Viltrox: de AF 24mm F1.8 en de AF 50mm F1.8. Welke vatting jouw exemplaar heeft maakt daarbij niet uit, want de voorzijde van het objectief is bij de Sony E- en de Nikon Z-uitvoering gelijk. Andere brandpunten hebben een eigen kap met een eigen PL-nummer; dat nummer staat op de buitenzijde van de originele kap.
Kenmerken
- Type: Zonnekap
- Uitvoering: Bloemvormig
- Materiaal: Kunststof
- Aansluiting: Bajonet
- Kleur: Zwart
- Garantie: 2 jaar
Meegeleverde accessoires
- 1 x Viltrox PL-20 Sunhood
O.a. geschikt voor
- Viltrox AF 24mm F1.8
- Viltrox AF 50mm F1.8
Info
Viltrox PL-20 Sunhood
Die Viltrox PL-20 Sunhood ist die Gegenlichtblende für das Viltrox AF 24mm F1.8 und das Viltrox AF 50mm F1.8. Die Blende hält Licht ab, das schräg auf die Frontlinse fällt und sonst als Schleier oder Blendenfleck im Bild landet. Weil sie ein Stück vor dem Glas übersteht, trifft ein Stoß gegen einen Türrahmen oder eine Tischkante auf den Kunststoffrand statt auf die Linse.
Highlights
- Passt auf das Viltrox AF 24mm F1.8 und das Viltrox AF 50mm F1.8
- Blütenform mit Bajonettverschluss an der Vorderseite des Objektivs
- Der Anschluss deines Objektivs spielt keine Rolle, die Blende sitzt vorn
- Geriffelte Grifffläche außen, auch mit Handschuhen gut zu fassen
- Hält seitliches Licht aus dem Bild und erhält den Kontrast im Gegenlicht
- Schützt die Frontlinse vor Stößen und Kratzern
Gebrauch
Licht, das schräg auf die Frontlinse fällt, erzeugt Blendenflecke und nimmt dem Bild den Kontrast. Die PL-20 fängt dieses Licht ab, bevor es das Glas erreicht, was sich vor allem im Gegenlicht und in der prallen Sonne bemerkbar macht. Du kannst die Blende einfach montiert lassen: Sie bleibt außerhalb des Bildfelds eines 24mm Objektivs und stört beim Scharfstellen nicht.
Ausführung
Die Blütenform hat Aussparungen im Rand, die dem rechteckigen Seitenverhältnis des Sensors folgen, sodass die Blende tiefer ausfallen kann, ohne ins Bild zu ragen. Der Korpus besteht aus schwarzem Kunststoff, die Innenseite ist matt und wirft Licht im Inneren der Blende kaum zurück. Außen sitzt eine geriffelte Grifffläche, mit der du den Bajonettverschluss löst.
Kompatibilität
Die PL-20 gehört zu zwei Objektiven aus der F1.8 Vollformatserie von Viltrox: dem AF 24mm F1.8 und dem AF 50mm F1.8. Welchen Anschluss dein Exemplar hat, spielt dabei keine Rolle, denn die Vorderseite des Objektivs ist bei der Sony E- und der Nikon Z-Ausführung gleich. Andere Brennweiten haben eine eigene Blende mit eigener PL-Nummer; diese Nummer steht außen auf der Originalblende.
Merkmale
- Typ: Gegenlichtblende
- Ausführung: Blütenform
- Material: Kunststoff
- Anschluss: Bajonett
- Farbe: Schwarz
- Garantie: 2 Jahre
Mitgeliefertes Zubehör
- 1 x Viltrox PL-20 Sunhood
Geeignet unter anderem für
- Viltrox AF 24mm F1.8
- Viltrox AF 50mm F1.8
Info
Viltrox PL-20 Sunhood
The Viltrox PL-20 Sunhood is the lens hood for the Viltrox AF 24mm F1.8 and the Viltrox AF 50mm F1.8. It blocks the light that hits the front element at an angle and would otherwise turn up as veiling glare or a flare spot in your shot. Because the hood extends well past the glass, a knock against a door frame or a table edge lands on the plastic rim instead of the lens.
Highlights
- Fits the Viltrox AF 24mm F1.8 and the Viltrox AF 50mm F1.8
- Petal shape with a bayonet fitting on the front of the lens
- The mount of your lens makes no difference, the hood sits on the front
- Ribbed grip on the outside, easy to turn with gloves on
- Keeps side light out of the frame and holds contrast in backlit scenes
- Protects the front element against knocks and scratches
Use
Light falling on the front element at an angle causes flare and takes the contrast out of a shot. The PL-20 catches that light before it reaches the glass, which shows most in backlight and in full sun. You can simply leave the hood mounted: it stays outside the field of view of a 24mm lens and does not get in the way of focusing.
Design
The petal shape has cut-outs in the rim that follow the rectangular aspect ratio of the sensor, so the hood can run deeper without appearing in the frame. The body is black plastic and the inside is matte, which keeps light from bouncing around within the hood. On the outside there is a ribbed grip you use to release the bayonet.
Compatibility
The PL-20 belongs to two lenses from the Viltrox F1.8 full-frame series: the AF 24mm F1.8 and the AF 50mm F1.8. Which mount your copy has makes no difference here, because the front of the lens is the same on the Sony E and the Nikon Z version. Other focal lengths have their own hood with their own PL number, and that number is printed on the outside of the original hood.
Characteristics
- Type: Lens hood
- Design: Petal shape
- Material: Plastic
- Mount: Bayonet
- Colour: Black
- Warranty: 2 years
Supplied accessories
- 1 x Viltrox PL-20 Sunhood
Suitable for, among other things
- Viltrox AF 24mm F1.8
- Viltrox AF 50mm F1.8